Name: GILBARCO VEEDER-ROOT Orpak OrPAY1000
Brand: GILBARCO VEEDER-ROOT
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Description Image (front) Image (rear)

Mounting screws

stainless Steel, M4x12

mm (x4)

Rubber isolator (one

for each wire)

Surface mounting

bracket without place

holders

Table 3-3 - Surface Mounting Bracket (without Place Holders) Installation Kit

3.5. Required Tools

The following tools are required to mount the OrPAY1000:

Torx T20 screw driver

Philips #1, or Flat 5 mm screw driver

Side cutters (to trim the cable ties)

Cable ties

Warning: Do NOT use power tools if working on a fuel station forecourt. Any spark could

cause an explosion.

25 OrPAY1000 Installation and Setup Manual

Questions and Answers:

Need help?

Do you have a question about the GILBARCO VEEDER-ROOT Orpak OrPAY1000 and is the answer not in the manual?

GILBARCO VEEDER-ROOT Orpak OrPAY1000 Specifications

General