Home:Basic device information
Setup:Main device settings
Back to Main:Returns to the Forecourt homepage
5.4.1. Home
The Converter Home page displays current device information (see Table 5-5):
Field Description
Pump Pump firmware version
Pump Boot Pump boot loader version
Table 5-5 - Device Information
5.4.2. Setup
The Setup page is comprised of four tabs: General Setup, Channels Setup, Log Level, and Save. Click on the
Setup navigation button to view and define the parameters in each tab.
5.4.2.1. General Setup
The Setup page opens with the General Setup tab selected (see Figure 5-20).
Figure 5-20 - General Setup Tab
The following actions are available:
Click Restore Factory Setup to reset the device to the factory defaults (optional)
Caution: All previously defined settings will be overwritten.
5.4.2.2. Channels Setup
Click on the Channels Setup tab. The following screen appears (see Figure 5-21):
49 OrPAY1000 Installation and Setup Manual
To Next Page
Loading...
Need help?
General
