and comply with this program completely to ensure safety while the equipment is down.
Hazardous Materials
Some materials present inside electronic enclosures may present a health hazard if not handled correctly.
Be sure to clean hands after handling equipment. Do not place any equipment in mouth.
Informing Emergency Personnel
Compile the following information for emergency personnel:
Location of accident (e.g. address, front / back of building, etc.)
Nature of accident (e.g. possible heart attack, run over by car, burns, etc.)
Age of victim (e.g. baby, teenager, middle-age, elderly, etc.)
Whether or not victim has received first aid (e.g. stopped bleeding by pressure, etc.)
Whether or not victim has vomited (e.g. if swallowed or inhaled something, etc.)
Warning: Oxygen may be needed at scene if gasoline has been ingested or inhaled. Seek
medical advice immediately.
Note: The maximum available current from the building installation (AC / DC power supply)
shall be less than 85A under any single fault condition.
North American Directives
For UL standard for North America, “TYPE 4 Enclosure” must be stated in the instructions.
European Directives
The OrPAY1000 complies with the necessary European Directives for the CE mark.
3.3. Preliminary Considerations
The following factors need to be considered in designing an installation for the OrPAY1000:
Physical Dimensions
The following displays the physical dimensions of OrPAY1000 (see Figure 3-1):
OrPAY1000 Installation and Setup Manual 20
To Next Page
Loading...
Need help?
General
