1-6
USER HANDBOOK
1.3.1 Archiving Stored Readings
Stored readings can be downloaded from the PS200 series
instrument to a PC, using the standard charging / comms cable
and additional software. Contact the GMI Sales Department
for further details.
1.4 FILTERS
The instrument is protected from water and dust ingress by
hydrophobic and dust (sample inlet) lters.
These lters should be checked regularly and replaced if
necessary (refer to ‘FILTER REPLACEMENT’ section in
Chapter 5 ‘OPERATOR MAINTENANCE’).
1.5 CONSTRUCTION
The PS200 series is housed in a tough, impact resistant
moulded case. Sealed to IP67, it can withstand physical impact
testing to EN 60079 section 1-5.
1.6 IDENTIFICATION LABEL
The label on the rear of the instrument includes serial number
and relevant certication details.