6-1
RECHARGE BATTERY
6.1 RECHARGE INSTRUMENT BATTERY
Use only GMI chargers to recharge PS200 series instruments.
WARNING: Charging is only permitted in a non-
hazardous area.
CAUTION: Switch the instrument off when charging
the internal battery.
The battery should be recharged in the following situations:
• The ‘LOW BATTERY’ ag appears on the display.
• The instrument will not switch On.
When the ‘LOW BATTERY’ icon appears on the display,
there is approximately 30 minutes operation left at normal
temperatures. The instrument will then switch Off
automatically.
There are four options available to the user to charge
the PS200 instrument battery, as follows:
1. Using the Charging Comms Clip (Part No. 64260)
together with the Mains Adaptor and cable (Part No.
64247) supplied with the instrument.
6