6-2
USER HANDBOOK
2. Charging up to five (5) instruments in the 5-Way
Charger (Part No. 64138) supplied complete with
universal PSU (Part No. 64299).
3. Using the 12V / 24V - USB Vehicle Charging Adaptor
(Part No. 64248).
4. Using the In-Vehicle Charging Cradle (part no. 64491)
supplied complete with USB Vehicle Charging Adaptor.
In all four options:
Once the instrument is connected to the charger, charging will
commence automatically.
During charging, the battery symbol and ‘CHARGING’
indication ashes in the display. Maximum recharge duration
is 4 hours allowing minimum instrument run times.
On completion of charging, the ‘full’ battery symbol is
displayed together with ‘CHARGED’ indication.
The instrument will not be damaged if left connected to the
charger.
6.1.1 Recharge Instrument using the Charging /
Comms Clip
The charging / comms clip (Part No. 64260), together with the
cable (supplied with Mains Adaptor), enables the instrument
battery to be charged by connecting the instrument to any of
the following power sources:
- 5V USB Mains Adaptor (Part No. 64247)
- USB port of a Personal Computer (PC) or Laptop
- 12V / 24V - USB Vehicle Adaptor (Part No. 64248)
The clip is easily connected to the instrument charging contact
pads and features a mini-USB socket to enable connection of
mini-USB charging / comms cable with a standard type USB
connector at the other end.
To Next Page
Loading...
