6-3
RECHARGE BATTERY
To connect charging / comms clip to the instrument, push the
clip in direction of arrows as illustrated, engaging tongue on
clip in instrument locating slot until rmly seated.
Fit standard type USB connector to power source, as selected
from the list.
On completion of charging, disconnect standard type USB
connector from power source then mini-USB from clip. Grip
charging / comms clip and rmly pull away from instrument
until tongue on clip disengages with location slot in instrument.
CONTACT
PADS (4)
LOCATING SLOT
LOCATING TONGUE
CHARGING / COMMS CLIP
(Part No. 64260)
MINI USB SOCKET
MINI USB
TO USB CABLE
Fig. 6-1 Charging Cable Connection
To Next Page
Loading...
