6-6
USER HANDBOOK
MINI-USB to USB
CABLE
(incl. in Part No. 64247 Mains Adaptor)
CHARGING COMMS CLIP
(Part No. 64260)
Fig. 6-4 Connect Cable to Charging / Comms Clip
Note:
1. The charging adaptor is designed to fit a standard
accessory socket that may vary in size in certain vehicle
types. Always ensure that you use a proper tting socket.
2. Some vehicle types and models do not provide power to
the accessory socket when the vehicle ignition is switched
off. Charging will only take place when the accessory
socket is powered. A red LED on the charging adaptor
indicates that power is ON.
3. Care should be taken not to leave the instrument on
charge for excessive periods when the vehicle ignition
is switched off as this will reduce the battery power of
the vehicle.
To Next Page
Loading...
