Gorgy Timing LEDI NETWORK iTS

To Next Page

To Previous Page

MDE-LEDInetworkITS-server-4078V1.3

DESCRIPTION

The bottom part of the screen shows the current conguration used by the NTP client

software :

It shows the different servers used for synchronization and the current synchronization

mode (on the screenshot above, there is only one server at IP address 192.168.10.202).

In addition, this screen part shows what is the server currently used for synchronization

(with a frame labeled ). If a commutation is in progress, the label  is dis-

played nears the related NTP server.

The middle part of the NTP screen allows you to congure the synchronization mode

and the NTP servers used:

If you select the checkbox Auto-detection, the LEDI Network ITS try to use the NTP

servers present on your network and use the more appropriate synchronization mode.

If you don’t select the checkbox Auto-detection, you have to indicate the synchroniza-

tion mode and the NTP servers to use.

4. WEB INTERFACE

ENGLISH

Gorgy Timing LEDI NETWORK iTS - Page 93