94
MDE-LEDInetworkITS-server-4078V1.3
4. WEB INTERFACE
The following table can help you to select the more appropriate parameters:
Mode
# of NTP
Description
One server 1 Use only one server for synchronization
Two servers 2
Use the rst server at startup. If this server fails,
commute to the second server. If this server fails,
commute to the rst one and so on…
Three servers 3
Use the rst server at startup. If this server fails,
commute to the second server. If this server fails,
commute to the third one and so on…
To Next Page
Loading...