34
Threading the Machine (Continued)
Preparing to Quilt
7. Feed the thread through the thread guide
above the large thread tensioner.
7
8. Pull the thread around the large thread
tensioner, between the tension discs.
Large Thread
Tensioner
8
9. Wrap the thread over the check spring.
Check
Spring
9
11. Pull the thread through the hole in the take-
up lever.
11
12. Then pass the thread down through the
bottom thread guide on the way to the
needle.
12
10. Next, pass the thread down and around
the thread guide next to the large thread
tensioner.
10
Thread Guide
Bottom
Thread Guide
To Next Page
Loading...
Need help?
General
