33
2. To prevent accidental stitching or needle
movement, press the Menu button on the
handlebar controls.
2
Menu
Threading the Machine (Continued)
Preparing to Quilt
4. Pull the thread straight up, through the
thread mast guide loop above the thread
stand.
Guide Loop
Thread Mast
4
5. Feed the thread through the top hole of the
thread guide rod. Wrap the thread around
to the back of the guide and insert through
the bottom hole.
Thread Guide Rod
5
Thread
Cone
Thread
Stand
3. Place the thread cone on the cone-style
thread stand toward the front.
3
6. Run the thread through the top hole on
the small thread tensioner. Then slip
the thread between the two discs, and
through the bottom hole of the small thread
tensioner.
6
Small Thread
Tensioner
1. Rotate the hand wheel at the rear of the
machine to raise the needle to the top
position.
1
Hand Wheel
To Next Page
Loading...
Need help?
General
