Smart Control Operation
30 3A3393C Operation
Stall Calculator
Stall Calculator is used to set the stall size. The striper
divides the measured length by the stall size to deter-
mine the number of stalls that will fit in the length mea-
sured.
1. Use to select Layout Mode. Press to
open Stall Calculator Menu.
2. The most recent length measured in Measure Mode
is displayed or press gun trigger control to start a
new measurement. Press again to stop measuring.
Stall size and calculated number of stalls are both
adjustable.
3. Press to return to Layout Mode. The Stall size
is saved and displayed on the Layout Mode screen.
4. Press and release gun trigger control to start mark-
ing dots. Press and release gun trigger control again
to stop.
Ref. Description
1 Opens Angle Calculator Menu.
See Angle Calculator, page 31.
2 Exits and returns stall size to Layout Mode.
3 Measured distance.
4 Calculated # of stalls. Changing the number of
stalls will change the stall size.
5 Stall size. Changing stall size changes the calcu-
lated # of stalls.
To Next Page
Loading...
Need help?
General
