Smart Control Operation
3A3393C Operation 33
Information
Use to select Setup/Information. Press to
open Information Menu.
Displays and logs life data and striper information.
Logs last four error codes that occurred.
Code Description
02 = Over pressure on sensor #1
03 = No transducer #1 detected
22 = Over pressure on sensor #2
23 = No transducer #2 detected
Set time and date using arrow keys.
Use to enable or disable low speed shutoff when
in Automatic Mode.
Use up and down arrows to adjust low speed shutoff
value.
See Information (2), page 34.