Graco XP70 Instructions

Shutdown
3A0420V 33
Shutdown
1. Follow Pressure Relief Procedure, page 24.
2. Flush mix manifold, hoses, and gun. See Flush Mix
Manifold, Hose, and Spray Gun, page 30.
3. Close the main air shutoff valve (CA).
Park
1. Open the circulation handle (AC) and adjust the air
regulator (CB) so that the pump runs slowly.
2. Close the circulation handle (AC) when the pump is
at the bottom of the stroke.
3. Close the air regulator (CB) and open the circulation
handle (AC).

Graco XP70 Specifications

General

Fluid Output	2.0 gpm (7.6 lpm)
Fluid Delivery	2.0 gpm (7.6 lpm)
Maximum Fluid Working Pressure	7250 psi (500 bar)
Maximum Air Input Pressure	100 psi (7 bar)
Fluid Outlet Size	3/8 in npsm(m)
Wetted Parts	Stainless Steel, PTFE, UHMWPE
Maximum Pressure	7250 psi (500 bar, 50 MPa)
Hose Length	50 ft