Graco XP70 Instructions

Recommended Spare Parts
60 3A0420V
Recommended Spare Parts
Keep these spare parts on hand to reduce downtime.
Pump Repair Kits
See page 14 to see what pumps are used on your sys-
tem. See lower manual for repair kits.
Pump Filter O-rings (packs of 10)
262483, Top o-ring
244895, Middle o-ring
262484, Bottom o-ring
Recirculation/Overpressure valve (see
page 42)
XP35: 262808, purple
(also for use with XP-h 284x01 assemblies)
XP50: 262809, gold
(also for use with XP-h 284x02 assemblies)
XP70: 262520, silver
(also for use with XP-h 284x03 assemblies)
15K692, Seal Mix Manifold Check Valve
Cartridge
NOTE: 15K692 must be replaced when cleaning the
check valves.
1/2 in. Mix Manifold Inlet Ball Valves
24M601, Ball valve repair kit
262740, Spare valve (no handle)
262739, Spare valve (single handle)
248927, Spare Mix Elements (pack of 25)
1/2 in. OD x 12 element, acetal plastic
248837, XTR Spray Gun Repair Kit
XHD010, Seat/Seal Kit for XHD
™
RAC
®
Tips
(5 pack)
XHDxxx, spray tips
See spray gun manual for tips.

Graco XP70 Specifications

General

Fluid Output	2.0 gpm (7.6 lpm)
Fluid Delivery	2.0 gpm (7.6 lpm)
Maximum Fluid Working Pressure	7250 psi (500 bar)
Maximum Air Input Pressure	100 psi (7 bar)
Fluid Outlet Size	3/8 in npsm(m)
Wetted Parts	Stainless Steel, PTFE, UHMWPE
Maximum Pressure	7250 psi (500 bar, 50 MPa)
Hose Length	50 ft