EasyManuals Logo

Graco XP70 Instructions

Graco XP70
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Warnings
6 3A0420V
TOXIC FLUID OR FUMES HAZARD
Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swal-
lowed.
Read MSDSs to know the specific hazards of the fluids you are using.
Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.
Always wear chemically impermeable gloves when spraying, dispensing, or cleaning equipment.
PERSONAL PROTECTIVE EQUIPMENT
You must wear appropriate protective equipment when operating, servicing, or when in the operating area
of the equipment to help protect you from serious injury, including eye injury, hearing loss, inhalation of
toxic fumes, and burns. This equipment includes but is not limited to:
Protective eyewear, and hearing protection.
Respirators, protective clothing, and gloves as recommended by the fluid and solvent manufacturer.
BURN HAZARD
Equipment surfaces and fluid that’s heated can become very hot during operation. To avoid severe burns:
Do not touch hot fluid or equipment.
WARNINGWARNINGWARNING
WARNING

Table of Contents

Other manuals for Graco XP70

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Graco XP70 and is the answer not in the manual?

Graco XP70 Specifications

General IconGeneral
Fluid Output2.0 gpm (7.6 lpm)
Fluid Delivery2.0 gpm (7.6 lpm)
Maximum Fluid Working Pressure7250 psi (500 bar)
Maximum Air Input Pressure100 psi (7 bar)
Fluid Outlet Size3/8 in npsm(m)
Wetted PartsStainless Steel, PTFE, UHMWPE
Maximum Pressure7250 psi (500 bar, 50 MPa)
Hose Length50 ft

Related product manuals