Approvals
10 3A0420ZAF
Approvals
Series Change
The XP cart sprayer was upgraded to use the XL air
motor, which provides improvements over the NXT
®
air
motor. The frame was upgraded to allow better access
to the lowers.
Benefits of the new air motor and frame include:
• Improved change over performance of air motor
• Better icing performance
• Ease of use
• Ease of service and greater access to lowers
Models
NOTE: See special conditions for safe use in your
Viscon HP Heater Manual, and PressureTrak manual.
XP Proportioning Pump
Packages
Packages include motor, pump lowers, and all
connection hardware.
NOTE: All pump packages are Ex rated except for the
XP-h pump packages (284xxx):
Pump sizes are marked on the pump cylinder; sizes are
nominal. See technical specifications in your Xtreme
lowers manual for actual displacement.
All systems CE marked
except where noted.
All systems noted by X
(in Approval column)
are Ex marked.
Series Change Description
C Upgraded air motor with XL motor and
frame change.
Using an XP or XP-h system, or components on the
system, not approved for hazardous locations or
explosive atmospheres may result in a fire or explosion
hazard.
The XP and XP-h systems are not approved for use in
hazardous locations unless the base model, all
accessories, all kits, and all wiring meet local, state,
and national codes.
See Systems with Explosion-Proof Heaters on page
25.
Building systems with bare proportioning pump
packages:
• Over Pressure Protection must be used, see
page 9. See chart on page 52 to identify the over
pressure relief valves to use with your system.
• All components must meet or exceed maximum
working pressures.
To Next Page
Loading...
Need help?
General
