System Components
3A0420ZAF 21
*Air Filter (MC)
Removes harmful dirt from compressed air supply. A
minimum 40 micron filter is used.
*Air Regulator (MB)
Adjusts air pressure to the motor and fluid outlet
pressure of pump. Locate the air regulator close to the
pump. Read air pressure on the gauge.
Fluid Line Components
• *Fluid Manifold (FA): Controls circulation and
pump priming.
• *Mix Manifold (FB): Combines A and B fluid into
one fluid line.
• *Circulation Handle (FC): Directs fluid flow for
circulation or mixing. Move to open position to
relieve fluid pressure, prime pumps, and circulate
material in hoppers. Move to closed position to
spray mixed material.
• *Dual Shutoff Handle (FE): Controls A and B fluid
flow for mixing and dispensing. Close before
flushing.
• *Solvent Flush Valve (FD): Controls solvent flow to
the mix manifold, hose, and spray gun.
• *Static mixer/gun hose kit: Thoroughly mixes the
two fluids and delivers the mixed fluid to the spray
gun. Includes static mixer and hoses to the spray
gun.
• Fluid Heaters (F): Heats the resin and hardener
before mixing. Improves the chemical reaction and
lowers viscosity to improve the spray pattern.
• Solvent Flush Pump (ZD): Flushes the mix
manifold. Includes a solvent pump, mounting
hardware, and solvent supply hose.
To Next Page
Loading...
Need help?
General
