P a g e | 77
GDS3705 User Manual
Version 1.0.1.16
Configure which DNS mode will be used to translate the SIP Server FQDN
(Default value is A Record):
A Record.
SRV.
NAPTR/SRV.
Note: Service providers can use DNS SRV feature to provider smooth
service transition backup in case service down.
Configures the SIP username or telephone number from ITSP.
Note: Letters, digits and special characters including @ are supported.
Configures the Authenticate ID used by SIP proxy.
Sets the Authenticate password used by SIP proxy.
Note: For security reasons, the SIP password is invisible on the web UI.
The GDS3705 is an audio only device, unlike GDS3710, user cannot see
who in at the door. Adding this “Display Name” will also allow user receiving
calls from GDS3705 knowing where the call is coming from (e.g.: which
door or extension the call is made), improve user experience when user is
using a IP phone with LCD display.
Select “User=Phone” or “Enabled” from the dropdown list.
If the SIP account has an assigned PSTN telephone number, this field
should be set to "User=Phone". Then a "User=Phone" parameter will be
attached to the Request-Line and "TO" header in the SIP request to
indicate the E.164 number. If set to "Enable", "Tel:" will be used instead of
"SIP:" in the SIP request. The default setting is "Disable".
To Next Page
Loading...
Need help?
General
