Grandstream Networks GDS3705 User Manual

P a g e | 86
GDS3705 User Manual
Version 1.0.1.16
Hostage Code
Hostage password can be used in a critical situation for instance a kidnaping or an emergency, users need
to enter the following sequence to trigger the actions set for the Hostage Mode: “* HostagePassword #”.
Table 21: Hostage Code Alarm
Enable Hostage Code
Enable/Disable the Hostage password mode.
Hostage Code
Configures the password for the hostage mode.
Select Alarm Action Profile
Select the Alarm action to be taken when the hostage password is
typed on the GDS3705 keypad.
Note: No sound alarm will be triggered in this mode.
Tamper Alarm
Tamper alarm is anti-hack from Hardware level. When this option is checked, if the GDS3705 is removed
from the installation board, it will trigger configured alarm actions. There is an embedded mechanism on
the GDS3705 that allows it to detect when the unit is removed.
Table 22: Tamper Alarm
Enable Tamper Alarm
When activating this mode, GDS3705 will keep alarming until the alarm
is dismissed.
Select alarm Action Profile
Select the type of alarms actions to be triggered for the tamper alarm
mode.
Keypad Input Error Alarm
Table 23: Keypad Input Error Alarm
Enable Alarm for PIN Input
Error
Enable/Disable the Input Error Alarm, GDS3705 will trigger alarm
actions at every 5 incorrect attempts.
Select Alarm Profile
Select the type of alarms actions to be triggered after 5 incorrect
attempts.
Non-Scheduled Access Alarm
Table 24: Non-Scheduled Access Alarm
Enable Non-scheduled
Access Alarm
When enabling this feature, GDS3705 will trigger alarm to related
administrator to be aware when legitimated users access the door out
of the allowed configured schedule.
Select Alarm Action Profile
Select the type of alarms actions to be triggered.

Grandstream Networks GDS3705 Specifications

General

Brand	Grandstream Networks
Model	GDS3705
Category	Intercom System
Language	English