5. After transfer target answers the call, the following screen will be shown up. If the user simply hangs
up or taps on “End” soft key, the call wil be transferred, and GXV3380 will hang up the call. If the user
taps on "Split" soft key to separate the calls, the user will talk to the second established call while the
first call is on hold.
Figure 57: Attended Transfer – Split
Besides attended transfers above, users could also consult the third party first before transferring the call.
1. During the active call, tap More then New Call to make the second call. This will place the current
call on hold.
2. The second call establishes after the call is answered.
3. During the active call, tap on "More" softkey.
4. Select "Transfer" to bring up transfer screen. The other call on hold will be displayed such as
.
5. Select transfer mode as “Attended” in the transfer mode bar and tap on the call on hold such as
to transfer the call.
6. The call will be transferred, and GXV3380 will hang up the call.
To Next Page
Loading...
Need help?
General
