Grandstream Networks UCM630 A Series User Manual

P a g e | 121
UCM630xA Series User Manual
Version 1.0.9.10
To start the auto provisioning process, under Web GUIValue-added FeaturesZero ConfigZero Config
Settings, fill in the auto provision information.
Figure 60: Auto Provision Settings
Table 28: Auto Provision Settings
Enable Zero Config
Enable or disable the zero-config feature on the PBX. The default setting
is enabled.
Enable Automatic
Configuration Assignment
By default, this is disabled. If disabled, when SIP device boots up, the
UCM630xA will not send the SIP device the URL to download the config
file and therefore the SIP device will not be automatically provisioned by
the UCM630xA.
Note:
When disabled, SIP devices can still be provisioned by manually sending

Grandstream Networks UCM630 A Series Specifications

General

Brand	Grandstream Networks
Model	UCM630 A Series
Category	Conference System
Language	English