Grandstream Networks UCM630 A Series - ARP Settings; Figure 26: GXP2160 Web Access Using UCM6302 A Port Forwarding; Table 13: ARP Settings

P a g e | 80
UCM630xA Series User Manual
Version 1.0.9.10
Figure 26: GXP2160 Web Access using UCM6302A Port Forwarding
ARP Settings
The ARP settings can be configured under Web GUISystem SettingsNetwork SettingsARP Settings
Table 13: ARP Settings
ARP GC
Threshold 1
Minimum number of entries to keep. Garbage collector will not purge entries if there
are fewer than this number. The default value is 128.
ARP GC
Threshold 2
Threshold when garbage collector becomes more aggressive about purging
entries. Entries older than 5 seconds will be cleared when over this number. The
default value is 512.
ARP GC
Threshold 3
Maximum number of non-PERMANENT neighbor entries allowed. Increase this
when using large numbers of interfaces and when communicating with large
numbers of directly connected peers. The default value is 1024.