Grandstream Networks UCM630 A Series - Global Policy

P a g e | 127
UCM630xA Series User Manual
Version 1.0.9.10
Note: Global Templates configuration has higher priority to Global Policy configuration.
Global Policy
Global Policy can be accessed in Web GUIValue-added FeaturesZero ConfigGlobal Policy page. On
the top of the configuration table, users can select category in the “Options” dropdown list to quickly navigate to
the category. The categories are:
 Localization: configure display language, data, and time.
 Phone Settings: configure dial plan, call features, NAT, call progress tones and etc.
 Contact List: configure LDAP and XML phonebook download.
 Maintenance: configure upgrading, web access, Telnet/SSH access and syslog.
 Network Settings: configure IP address, QoS and STUN settings.
 Customization: customize LCD screen wallpaper for the supported models.
 Communication Settings: configure Email and FTP settings
Select the checkbox on the left of the parameter you would like to configure to activate the dropdown list for this
parameter.
Figure 65: Global Policy Categories
The following tables list the Global Policy configuration parameters for the SIP end device.