Grandstream Networks UCM630 A Series - Figure 31: Create New Firewall Rule; Table 17: Firewall Rule Settings

P a g e | 88
UCM630xA Series User Manual
Version 1.0.9.10
 Action: "Accept"
 Type "In"
 Destination port is set to the system login port (e.g., by default 8089)
 Protocol is not UDP
Figure 31: Create New Firewall Rule
Table 17: Firewall Rule Settings
Rule Name
Specify the Firewall rule name to identify the firewall rule.
Action
Select the action for the Firewall to perform.
 ACCEPT
 REJECT
 DROP