Grandstream Networks UCM630 A Series - Figure 33: Fail2 Ban Settings; Table 19: Fail2 Ban Settings

P a g e | 92
UCM630xA Series User Manual
Version 1.0.9.10
Figure 33: Fail2ban Settings
Table 19: Fail2Ban Settings
Global Settings
Enable Fail2Ban
Enable Fail2Ban. The default setting is disabled. Please make sure both "Enable
Fail2Ban" and "Asterisk Service" are turned on to use Fail2Ban for SIP
authentication on the UCM630xA.
Banned Duration
Configure the duration (in seconds) for the detected host to be banned. The default