Grandstream Networks UCM630 A Series - Figure 20: Ucm630 Xa Using 802.1 X as Client; Figure 21: Ucm630 Xa Using 802.1 X EAP-MD5

P a g e | 73
UCM630xA Series User Manual
Version 1.0.9.10
Figure 20: UCM630xA Using 802.1X as Client
Figure 21: UCM630xA Using 802.1X EAP-MD5
The following table shows the configuration parameters for 802.1X on UCM630xA. Identity and MD5 password
are required for authentication, which should be provided by the network administrator obtained from the
RADIUS server. If “EAP-TLS” or “EAP-PEAPv0/MSCHAPv2” is used, users will also need to upload 802.1X CA
Certificate and 802.1X Client Certificate, which should be also generated from the RADIUS server.