GRAPHTEC CE7000-60 - Scan Range Necessary to Detect the Registration Mark

5-4
Scan range necessary to detect the registration mark
The range of tool carriage and media movement needed to scan the registration mark is as following.
Do not print in the shaded area shown in the Figure below.
a
a
a
a
a
a
a
a
a
a
<For 3POINTS>
MARK TYPE 1
MARK TYPE 3
MARK TYPE 2
MARK TYPE 4
Registration mark scanning area
a=6mm
Feed direction of mediaFeed direction of media Feed direction of mediaFeed direction of media