GRAPHTEC CE7000-60 - 8.3 Perform Automatic Pre Feed When Media is Set (Initial Feed)

8-6
8.3
Perform Automatic Pre Feed When Media is
Set (Initial Feed)
It can be set to automatically feed and return the length of the page when the media is loaded and the media set
lever is raised.
This is equal to automatically perform the "Pre Feed" to prevent the shifting of the media.
•
"Pre Feed of Media (Paper or Marking Film)"
•
"Perform Automatic Pre Feed When Cut Data is Received"
•
"Setting Feed Speed for Media Set"
Supplement
This setting will be saved even if the power is shut off.
Operation
Supplement
Perform the settings in Normal mode.
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the [4] key (MEDIA).
MEDIA SETTING screen (1/2) is displayed.
3
Press the [4] key (INITIAL FEED).
INITIAL FEED screen is displayed.
4
Set the [1] key (ON) or the [2] key (OFF).
Supplement
It will return to MEDIA SETTING screen (1/2)
without changing the settings when you press
the [ESC] key (CANCEL).
5
Conrm the setting and press the [ENTER] key (SET).
Setting will be conrmed and it will return to MEDIA SETTING screen
(1/2).
6
Press the [PAUSE/MENU] key.
It will return to default screen.