15-26
Reading the error message
Contents of most current 32 errors can be checked. Errors before that are not recorded.
Operation
Supplement
Perform the settings in Normal mode.
1
Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
2
Press the POSITION ( ) key (ADV.).
ADVANCE screen (1/4) is displayed.
3
Press the POSITION ( ) key twice.
ADVANCE screen (3/4) is displayed.
Supplement
•
"NO ERROR" will be displayed if there is no
error.
•
Up to 4 error messages will be displayed on
the screen. Up to 32 error messages can be
displayed by pressing the POSITION ( )
key.
•
When displayed, while the power is on it
indicates how long ago an error occurred.
The lower the value, the more recently the
error occurred.
4
Press the [3] key (ERROR MESSAGES).
ERROR MESSAGES screen is displayed. Left column is time the error
occurred, and right column is the type of the error. 4 error messages are
displayed at once. If there are more error messages, next 4 messages
will be displayed by pressing the POSITION ( ) key.
To Next Page
Loading...
