GRAPHTEC CE7000-60 - Operation from [COND;TEST] Key; Simple Mode; Normal Mode

2-36
Operation from [COND/TEST] key
Simple mode
CONDITION screen (1-5): (Simple mode)
The [COND/TEST] key brings up the SETTING screens, where you can change the media type and tool
conditions.
The preset cutting condition is used when the media type is selected.
[COND/TEST] : This will clear the CONDITION screen and return to default screen.
See "Selecting Tool Condition" for the detailed tool condition.
Normal mode
CONDITION screen (1-3) : (Normal mode)
The [COND/TEST] key brings up the SETTING screens, where you can change the media type and tool
conditions.
Up to 8 CONDITION settings can be saved with different settings in numbers 1 through 8.
[COND/TEST] : This will clear the CONDITION setting screen and return to default screen.
See "Selecting Tool Condition" for the detailed tool condition.