GRAPHTEC CE7000-60 - Checking the Recommended Setting of Registration Mark

5-10
Checking the recommended setting of registration mark
The media condition to be used is detected and then recommended conditions such as scan mode / registration
mark color / color of background of registration mark are displayed.
Operation
Supplement
Perform the settings in Normal mode.
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the [2] key (ARMS).
ARMS SETTING screen (1/3) is displayed.
3
Press the [2] key (RECOMMENDED SETTINGS).
The following message is displayed.
4
Press the POSITION ( ) keys to move the tool to the
scanning start position (any position).
Feed direction of media
Registration mark scanning start position
50mm
50mm
5
Conrm the position of the tool and press the [ENTER] key
(SET).
Supplement
Do not move the tool carriage to the printed
area.
6
The tool carriage moves and automatically detects the media
condition.
The media condition is detected by moving 50 mm in the Y
direction and 50 mm in the X direction with respect to the
scanning start position.