GRAPHTEC CE7000-60 - Page 308

15-8
Error
Displayed
LCD Display Cause Solution
E03013
Error 13
A parameter outside of the permissible
range was specied in the I/O related
command.
Check the program.
E03014
Error 14
Too many parameters in the I/O related
command.
Check the program.
E03015
Error 15
Framing error, parity error, or overrun error
has occurred.
Set the RS-232C transmission condition.
E03016
Error 16
Interface buffer memory has overowed. Set the RS-232C transmission condition.