GRAPHTEC FC9000-140 - Page 107

FC9000-UM-251-9370 8-17
8 Electrical Adjustment
Adjustment Menu List
Sensor & Key test.
Pen pressure adjustment.
Distance adjustment.
Sufxsetting(SettoSTDforstandardmodel,Donotchange.).
Registration mark sensor sensitivity adjustment.
Registration mark sensor position adjustment.
Home sensor position adjustment (Do not change.).
Registrationmarksensorlevelconrmation.
Dots check for the LCD.
Running test for X and Y directions.
Registration mark sensor hood condition (Do not change.).
Running test for registration mark sensor hood.
Do not use.
Pen force setting for the maintenance mode.
X media sensor position adjustment.
Priority of Soft ID reset command (Do not change.).
1 and 2 pen position adjustment for the 2-pen model.
2-pen exchange position adjustment for the 2-pen model.
2-pen detecting height adjustment for the 2-pen model.
Displays cutting distance.
Cross cutter position adjustment.
Cross cutter detecting height adjustment for the 2-pen model.
Number of push rollers setting.
Aging (This is used for production line.).
Adjustment for rewind sensor.
Adjustment for friction.