GRAPHTEC FC9000-140 - Option & Supply Parts

FC9000-UM-251-9370 1-3
1 INTRODUCTION
1.3 Option & Supply Parts
Option
Option mane Model name Description Q’ty
Take Up unit OPH-A43 For FC9000-140 1 set
OPH-A44 For FC9000-160 1 set
Flange set OPH-A52 Flange for the stock roll media 1 set
Supply Parts
Supply mane Model name Description
Cutting blade holder PHP33-CB09N-HS 1 piece: for CB09U series blade.
PHP33-CB15N-HS 1 piece: for CB15U series blade.
PHP35-CB09N-HS 1 piece: for CB09U series blade. Metal top type
PHP35-CB15N-HS 1 piece: for CB15U series blade. Metal top type
Cutting blade CB09UB-5 5 blades/pack: 0.9 mm dia. 45º angle, Supersteel
CB09UB-K60-5 5 blades/pack: 0.9 mm dia. 60º angle, for thin lm
CB15U-5 5 blades/pack: 1.5 mm dia. 45º angle, Supersteel
CB15U-K30-5 5 blades/pack: 1.5 mm dia. 30º angle, for sandblast rubber
CB15UA-5 5 blades/pack: 1.5 mm dia. 45º angle, for high intensity reective lm
CB15UA-K30-5 5 blades/pack: 1.5 mm dia. 30º angle, for high intensity reective lm
Water-based ber-tip pen holder PHP31-FIBER 1 piece: pen holder for KF700 series pen
Water-based ber-tip pen KF700-BK 10 pens/pack: pen (black)
KF700-RD 10 pens/pack: pen (red)
Oil-based ballpoint pen holder PHP34-BALL 1 piece: pen holder for KB700 pen
Oil-based ballpoint pen KB700-BK 10 pens/pack: pen (black)
Cross-cutter blade PM-CC-002 1 blade/pack: cross-cutter blade
Pouncing tool PPA33-TP12 1 set/pack: steel pin 1.2 mm dia