FC9000-UM-251-9370 7-24
7 DISASSEMBLY AND REASSEMBLY
7.2.9 Replacing the Y-relay Board
How to detach the Y-relay board
(1) Detach the control panel assembly (Refer to subsection 7.1.3.).
(2) Detach the center cover (Refer to subsection 7.1.4.).
(3) Disconnect all the cables from the Y-relay board.
M3L6 binding head screw
Y relay board
(4) Remove the three M3L6 binding head screws attaching the Y-relay board.
(5) Detach the Y-relay board from the Y-slider.
How to reinstall the Y-relay board
(1) Reattach the Y-relay board in the reverse order in which it was detached.
To Next Page
Loading...
