GRAPHTEC FC9000-140 - Replacing the Push Roller Base

FC9000-UM-251-9370 7-41
7 DISASSEMBLY AND REASSEMBLY
7.2.18 Replacing the Push Roller base
How to detach the Push Roller base
Don’t loosen any screws on the push roller assembly.
(1) Detach the push roller assembly (Refer to subsection 7.2.17.).
(2) Release the spring from the push roller arm.
Push roller arm
Spring
(3) Detach the cam from the push roller assembly.
Cam
(4) Remove the two E-ring holding the shafts of push roller base.
E-ring