GRAPHTEC FC9000-140 - Page 16

FC9000-UM-251-9370 2-4
2 Setup
(6) Attach a media stocker roll bracket to each of the left and right stand sides as shown in the picture
below. And then fasten with the four M5L16 cap screws (two long screws for each side), using the Allen
wrench.
(7) Attach the stopper to the stock roller, and then put on the stock rollers on the media stocker bracket as
shown in the picture below.
(8) Conrm the direction of basket cloth arm as shown in the picture below, and then attach the basket cloth
arm to the foot of stand.
Fasten with the eight M5L16 cap screws (eight long screws for each basket cloth arm), using the Allen
wrench.