GRAPHTEC LABELROBO LCX603 - Removing the Packing Materials

LCX603-UM-651-9370 2-6
2 Setup
2.3 Removing the Packing Materials
RemoveallpackingmaterialsfromtheLCX603beforeturningonthepowerofLCX603.
(1) RemovethePPbandholdingtheseparatorarm.
(2) Removethelamenttapesholdingthepenblock.
(3) Removethelamenttapesholdingthepressleverandthecamlever.
(4) Removethepackingmaterialsfromthebottomofthepenblock.