GRAPHTEC LABELROBO LCX603 - The Flowchart of Setup

LCX603-UM-651-9370 2-15
2 Setup
2.7 The Flowchart of Setup
Performsetupbythefollowingprocedureofowchart.
2.9.2 Installing the cutter pen to the
LCX603
2.10 Turning on the power
2.8 Connecting the AC power cable
2.11 Installing the media to the media
stocker
2.12 Loading media to the LCX603
2.21 Cross cutter setting
2.22 Installing the laminate
2.13 Installing the Ink Ribbon
2.20 Installing the Separator
2.14 Adjusting the density
2.15 Test Printing and Density
Adjustment
Output the data to the LCX603
Installtheprinterdriver
Explain the operation of LCX603
2.9.1 Preparing the Cutter Pen
2.16 Adjusting the blade length and
the tool condition
2.17 Adjusting printing and cutting
position
2.24 Setting the Registration Mark Type
2.25 Setting the Unit Length
2.26 Setting the Frame Cut
2.18 Distance Adjustment
2.16 Adjusting the blade length and
the tool condition
2.19 Adjusting the print head position
2.23 Setting the Anti-Wrinkle Line