GRAPHTEC LABELROBO LCX603 - Page 22

LCX603-UM-651-9370 2-14
2 Setup
Part Names 3
Ribbon stocker cover
Lock lever
Ribbon lever
Media ejection knob
Front cover
Ribbon lever.................................Makesitpossibletoprinttheribboncassettebyclosingthelever.
Ribbon stocker cover..................Coverthatclosesaftertheribbonstockerisset.
Lock lever......................................Aleverthatsecurestheribbonstockercoverwhenitisclosed.
Media ejection knob.....................Usedwhenthemediaisdetached.
Front cover....................................Coverfortheribbonstockersection.
Cutter Unit
Cutting mat
Grit roller
Push roller
Cam lever
Tool carriage
Tool holder
Cutting mat...................................Movesthetopofthecutterbladesandpreventsbladeabrasion.
Grit roller.......................................Feedsmediaandcanmovefromsidetoside.
Push roller.....................................Thruststhemediaintothegritroller.
Tool carriage.................................Sectionthatmovesthecutterforwardorbackward.
Tool holder....................................Sectionthatholdsthecutterandmovesupanddown.
Cam lever......................................Movesthepushrollerverticallyandsecures/releasesmediawhenthe
mediaissetinthecuttingsection.