GRAPHTEC LABELROBO LCX603 - Setting the Unit Length

LCX603-UM-651-9370 2-91
2 Setup
2.25 Setting the Unit Length
Switchthedisplayunitofthecoordinatevalueshownonthedisplaytomillimeters(mm)orinches(inch).
Lengthunitswitchingisreectedinthefollowingitems.Otherlengthsarexedinmillimeters(mm).
•Mediasizevalue
•Distanceadjustmentinputvalue(inputismmunitandstandardinchisshownvertically)
•Headadjustmentinputvalue
•Positionadjustmentinputvalue
•mdisplayduringprintedlengthvalue(mm)selection;ft(feet)displayduringinchselection.
How to set the unit length
Conrmtheunitlengthissettommthistime.
Conrmtheregistrationmarksettingissettothe3pointsthistime.
(1) PresstheLOCALKeyinREADYstatus,thefollowingmenuisdisplayed.
PR I N TER M ENU>
C U T TER M ENU>
O U TPU T ALL>
(2) PresstheF1Key(PRINTMENU),thefollowingmenuisdisplayed.
C OPY>
D A TA C L EAR>
C OND I T ION>
1/4
(3) PresstheNEXTKeyuntilthefollowingmenuisdisplayed.
RE G ISTR A T ION M ARK>
U N I T L E N GTH>
F U NCTI O N SE T T ING>
3/4
(4) PresstheF2Key(UNITLENGTH),thefollowingmenuisdisplayed.
UNIT LENG T H
< mm>
SELE C T:
↑ ↓
YES: E NTER N O :ESC
(5) Select“mm”byusingthePOSITIONKey(▲▼).
UNIT LENG T H
< mm>
SELE C T:
↑ ↓
YES: E NTER N O :ESC
(6) PresstheENTERKeytostorethesetting,andthemenureturnstothepreviousmenu.
(7) PresstheLOCALKey,themenureturnstotheREADYmenu.