GRAPHTEC LABELROBO LCX603 - Preparation Items before the Setup

LCX603-UM-651-9370 1-2
1 Preparation before the setup
1.2 Preparation items before the setup
TheprintingtestandthecuttingtestwillbeperformedwhentheLCX603isinstalling,preparethefollowing
itemstosetupfortheLCX603.
Items Usage Q’ty
PC Toprintoutthetestpattern. 1
USBcable Toprintoutthetestpattern. 1
Media:FNSMatN50-1310B Mediaforprintingtest 1roll
Inkribbon:RP120-B-R4A,Resin Resininkribbonprintingtestforthehead1,(Blackribbon) 1roll
Inkribbon:RP120-BL-R4A,Resin Resininkribbonprintingtestforthehead2,(Blueribbon) 1roll
Inkribbon:RP120-R-R4A,Resin Resininkribbonprintingtestforthehead3,(Redribbon) 1roll
Inkribbon:WD120-B-R4A,Semi-Resin Semi-Resininkribbonprintingtestforthehead1,(Blackribbon) 1roll
Inkribbon:WD120-BL-R4A,Semi-Resin Semi-Resininkribbonprintingtestforthehead2,(Blueribbon) 1roll
Inkribbon:WD120-R-R4A,Semi-Resin Semi-Resininkribbonprintingtestforthehead3,(Redribbon) 1roll
Laminate:PET16-1110R4A Laminatingtest 1roll
Bobbin Torewindthelaminateandtheseparatedmedia. 2
Blade:CB09UA Tocuttingtest 1
Bladeholder:PHP32-CB09N-HS Tocuttingtest 1
CleaningKit Tocleantheprinthead. 1set