GRAPHTEC LABELROBO LCX603 - 1 Preparation before the Setup; Confirming the Installing Space for the LCX603

LCX603-UM-651-9370 1-1
1 Preparation before the setup
1 Preparation before the setup
1.1 Conrming the Installing Space for the LCX603
ConrmtheinstallationspaceasshowninthepicturebelowbeforeinstallingtheLCX603.
PleasediscusswithyourenduserbeforeinstallingtheLCX603toyourcustomers’ssite.
WheninstallingtheLCX603onatable,pleaseuseadurable,solidtablewithasurfacelargerthan1000
mm×400mm.
 Leavesufcientspaceforoperationsinfrontofandbehindtheprinter.
500mm
50mm
1000mm
500mm
Notes for installation of the LCX603
 Whensettinguponadeskorworktable,makesuretherearetwopeopletocarryoutthe
task.
DonotusethehandleinthemediastockersectionwhenliftuptheLCX603,otherwisethe
LCX603willbreak.
Handle