GRAPHTEC LABELROBO LCX603 - Connecting the AC Power Cable

LCX603-UM-651-9370 2-16
2 Setup
2.8 Connecting the AC power cable
Thissectionexplainshowtoturnonthepower.
Butdonotturnthepoweronuntilthelabelmaterialshavebeenset.
(1) MakesurethepowerswitchisintheOff(O)position.
(2) ConnectoneendoftheattachedpowercablestotheAClineinletandtheotherendtoanACpower
outletoftheratedsupplyvoltage.