GRAPHTEC LABELROBO LCX603 - Default Chapter; Table of Contents

LCX603-UM-651-9370 iv
CONTENTS
1 Preparation before the setup .........1-1
1.1 Conrming the Installing Space for the LCX603 .........1-1
1.2 Preparation items before the setup ..............................1-2
1.3 Preparation knowledge before the setup .....................1-3
2 Setup ................................................2-1
2.1 How to take out the LCX603 from the Packing Box ....2-1
2.2 Installing the LCX603 on the Table .............................. 2-5
2.3 Removing the Packing Materials ................................. 2-6
2.4 Conrming the Standard Accessories .........................2-9
2.5 Conrming the power supply and the LAN cable .....2-10
2.6 Parts Names and Functions ........................................2-11
2.7 The Flowchart of Setup ................................................2-15
2.8 Connecting the AC power cable .................................2-16
2.9 Installing the Cutter Pen ..............................................2-17
2.9.1 Preparing the Cutter Pen ........................................................ 2-17
2.9.2 Installing the cutter pen to the LCX603 .................................2-19
2.9.3 How to use the control panel .................................................2-20
2.10 Turning on the power ...................................................2-22
2.11 Installing the media to the media stocker ..................2-23
2.12 Loading media to the LCX603 .....................................2-26
2.13 Installing the Ink Ribbon ..............................................2-39
2.13.1 How to install the ink ribbon stocker to the LCX603 ...........2-39
2.13.2 Regarding the Ink Ribbon Stocker ....................................... 2-40