GRAPHTEC LABELROBO LCX603 - Page 55

LCX603-UM-651-9370 2-47
2 Setup
Data Type A Data Type B Data Type C Data Type D
ABCDEF
GHIJKL
ABCDEF
GHIJKL
ABCD ABCD
Matching with media and ink ribbon
Typeofinkribbon
Semi-RESIN RESIN
FNS FNSMatN25-1310B-R4 Goodprintingquality Goodprintingquality
FNSMatN50-1310B-R4 Goodprintingquality Goodprintingquality
FNSMatS50-1310B-R4 Goodprintingquality
Printable,printingqualityisnotsogood
FR1615-50-1310-R4A Goodprintingquality Goodprintingquality
PET
(Transparence)
PET25A-1310B-R4 Goodprintingquality
Printable,printingqualityisnotsogood
PET50A-1310B-R4 Goodprintingquality Printable,printingqualityisnotsogood
FR1225-50-1310-R4A Goodprintingquality Goodprintingquality
PET
(White)
PETWH50A-1310-R4A Goodprintingquality Goodprintingquality
FR1415-50-1310-R4A Goodprintingquality Goodprintingquality
PET(Yellow) FR1015-50-1310-R4A*1 Goodprintingquality Goodprintingquality
YUPO FR5311-85-1310-R4A
Printable,printingqualityisnotsogood Printable,printingqualityisnotsogood
FR6311-80-1310-R4A Printable,printingqualityisnotsogood Printable,printingqualityisnotsogood
GrossPaper GrossPW-1310B-R4*2 Printable,printingqualityisnotsogood Notprintable
NPCOATPaper NPCOATPW-1310B-R4
Printable,printingqualityisnotsogood Notprintable
*1Theyellowpetmayvaryinacolorafterprintingdependingonaninkribboncolor.
*2GrossPW-1310B-R4ismaterialforexclusiveuseoftheinkribbonofSemi-RESINWD120-B-R4A(black).
How to adjust the printing density
(1) Adjusttheprintingdensity.
Atthistime,theRESINinkribbonRP120-B-R4Ahasbeeninstalledtotheprinthead3.
AndthemediaFNSMatN50-1310Bhasbeeninstalled.
Setthemediatypeto“FNSMatN50-1310B”.
Settheribbontypeto“RESIN”.
Set42fortheprintingdensityaccordingfromthetableof“Theguideofdensityfortheinkribbonand
themedia”.
Andsettheprintingdensityforotherprintheadbysameprocedurealso.
(2) Settheallribbonlevertothesetposition.
Set all lever to set position.