GRAPHTEC LABELROBO LCX603 - Page 57

LCX603-UM-651-9370 2-49
2 Setup
(10)PresstheF2Key(DENSITYHEAD3),thefollowingmenuisdisplayed.
Selecttheribbontype“RESIN”withthePOSITIONkeys(▲▼).
HEAD 3 RIB B O N T Y P E
< R E SIN>
SELE C T:
↑ ↓
YES: E NTER N O :ESC
(11) PresstheENTERkey,afterribbontypeisselected,thefollowingmenuisdisplayed.
SelecttheDENSITY“42”withthePOSITIONkeys(▲▼).
HEAD 3 DEN S I TY
<42>
SELE C T:
↑ ↓
YES: E NTER N O :ESC
(12)PresstheENTERkey,afterDENSITYisselected,thefollowingmenuisdisplayed.
CON S TRUC T I ON M E DIA>
DEN S I TY H E AD3>
DEN S I TY H E AD2>
DEN S I TY H E AD1>
(13)Selecttheinkribbontypeandtheprintingdensityforthehead1andhead2bysameprocedureof
theprinthead3densitysetting.
(14)PresstheLOCALKey,themenureturnstotheREADYmenu.
(15)Performthetestprinttoconrmprintingresultisgoodquality.