GRAPHTEC LABELROBO LCX603 - Page 79

LCX603-UM-651-9370 2-71
2 Setup
(9) Measuretheamountofvariancebetweenthecrossmarkandthehorizontallineinthesecondpage.
Thisvalueisusedtoadjusttheprinthead3andtheprinthead2horizontalposition.
Measuretheamountofvariancebetweenthecrossmarkandtheverticallineinthesecondpage.
Thisvalueisusedtoadjusttheprinthead3andtheprinthead2verticalposition.
Feeding direction
Y
X
Second page
Measure the amount of variance between the cross mark and the horizontal line.
Measure the amount of variance between the cross mark and the vertical line.
Printed with head 3
Printed with head 1
Y
X
Amount of variance
Correction:-X
Amount of variance
Correction:-Y
(10)Inputtheamountofvariance(correctionfortheXandY)forthehead2andthehead1.
(11) PresstheLOCALKeyinREADYstatus,thefollowingmenuisdisplayed.
PR I N TER M ENU>
C U T TER M ENU>
O U TPU T ALL>
(12)PresstheF1Key(PRINTMENU),thefollowingmenuisdisplayed.
C OPY>
D A TA C L EAR>
C OND I T ION>
1/4
(13)PresstheNEXTKeyuntilthefollowingmenuisdisplayed.
PRI N T SE T T ING>
PRI N T TE S T PA T T ERN>
H EAD A D JUS T M ENT>
2/4 PRIN T E D L E N GTH>